RDS Technology Weighlog 200, Руководство пользователя

Страница: 20 / 34

CALIBRATION
20
3.4 Set Zero (with empty bucket)
6.2.2 Set Weighing Mode (“ dYn ” or “ StAt ”)
6.2.3 Set Initial Cal Factor (= Max. Load Capacity in tonnes)
6.2.4 (i)
6.2.4 (ii)
Weight Cal. Routine
DYN. MODE STAT. MODE
“
Load FASt ” Fast lift (full load)
“ Load Slo ” Slow lift (full load)
“
Empt FASt ” Fast lift (empty bucket) (note 1-p.18)
“
Empt Slo ” Slow lift (empty bucket)
“ ZERO LIFT ” – Sets Prop. Scaling/Speed “ ZERO LIFT ”
Comp. for all dynamic channels Lift empty bucket
Determine Cal Factor (the “ LOAD ” sequence)
Enter known weight on instrument
“ LOAd LIFt ”
Place a known weight in the bucket and lift at normal speed
“ DONE ”