WEIGHING
16
Automatic Printing
NOTE: The print mode in CAL Mode 3 (6.4.2) must
be set to either “REC” “ROLL” or “ENT” to
enable automatic printing.
“REC” / “ROLL” Print Mode
The instrument will automatically generate
a “REC” or “ROLL” type printout when you
reset any channel to zero, for example,.
after completing a load.
The job number increments by one each
time any channel total is reset.
“
ENT” Print Mode
If “ENT” print mode is set in CAL Mode 3,
the instrument will automatically print the
weight of the last bucket lift/trailer load
(Fig. 15b), when you press the button
or the Remote Enter switch to add the
bucket weight/trailer load to the channel
total.
NOTE: Pressing the ZERO button will cancel routine.
Figure 15a : Totals Summary
Figure 15b : “ENT” Printout
