LIFTLOG 1000 – INSTALLATION AND CALIBRATION
25
Printing
Printer
COM Port
----
Printing deactivated
COM 1
Select the Com Port to which the printer is connected.
If connecting a printer other than an RDS "ICP300" printer, check the
settings in "Port Setup" match the printer specification.
COM 2
Print Mode
Short Load by Load
Prints a summary of the last job cleared (a).
Long Load by Load
Prints a summary of the last job c space for customers Name
and Address (b).
Lift by Lift
Prints a summary of the last job c individual lift totals (c)
Auto Print
On / Off
On - Automatically prints as selected above, after a job is cleared.
Off – Allows manual printing only (press to access the print
menu).
ICP 300
On / Off
On – Uses ICP300 protocol / character set
(a)
(b)
(c)
