4
Requirements
§
The EC6000i Gen2 and the EC7000i units are for indoor use only. Keep the EC6000i Gen2 and the
EC7000i
dry
and avoid areas of high humidity.
§
The EC7000i requires a higher current power supply (RDM P/N# 302671). The EC6000i Gen2 can use
its supplied power supply or the higher current power supply. See
Specifications
on page 21 for
power supply details.
§
Do not remove any cabinetry
other than the areas specified in this guide; removing cabinetry other
than the areas specified in this guide will void the warranty.
Recommendations
§
This unit may be installed and programmed by a distributor (reseller) other than the original
manufacturer.
Record all distributor contact information
for future reference.
§
Save the original box
and packing material. Re-use them if the unit must be shipped to a new location.
§
Position the unit
so that the operator has easy access to the check path and a clear view of the LED.
Do not put the unit close to a heat source, in direct sunlight, or close to any device that can emit
electromagnetic interference such as a computer monitor or power adapter. Do not use the unit near
water, including a sink, swimming pool, or damp basement.
