19
Check Feeder Does Not Function Properly
Ensure that you are inserting the check properly: flush to the right side of
the EC6000i Gen2 or the EC7000i, information side facing up, with the
MICR line to the inside right. If the problem persists, contact your
distributor. Remove any debris by following the directions below:
1. Press the latch and lift the cover to access the imaging
frame.
2. Lift the imaging frame to access
the document feed plate.
3. Clear any paper or debris from the
imaging frame and document feed
plate.
4. Ensure that the black fingers on the
baffle move freely (EC7000i only).
5. Use a lens cleaning tissue or a damp lint-free cloth to
remove any ink or dust from the document sensors.
6. Ensure that the rollers under the baffle are clean
(EC7000i only).
7. Re-close the imaging frame and cover.
Rollers
Black
Fingers
Document
Sensors
