16
Maintaining the EC6000i Gen2 or EC7000i
The EC6000i Gen2 or EC7000i performs best when all working surfaces are clean and free of foreign
material.
Cleaning the Scanner
§
To clean the outside cabinetry:
Use a damp cloth and mild soap.
§
To clean the inside of the unit:
To remove dust and debris inside the unit, open
it by following the steps below. Use a dusting brush designed for use on
electronic equipment, or use a compressed air duster. To clean the inside:
1. Press the latch and lift the cover to access the imaging frame.
2. Lift the imaging frame to access the document feed plate.
3. Locate the blue tab on the side of the unit. With your thumb positioned on
the outside of the unit, apply enough pressure to pull the blue tab towards
the outside of the unit and hold it there.
4. While holding the blue tab, lift the document feed plate up and to the left or
up and from the right to free it from the opposite side.
5. Remove the plate.
6. Ensure that the black fingers on the baffle move freely (EC7000i only).
CAUTION:
•
Prior to cleaning, always disconnect the power.
•
Solvents or harsh cleaners may damage or discolor the cabinetry.
