RDL MCM-030, Руководство пользователя

Страница: 9 / 20

METER MODE
(cont.)
Each press of the GREEN button will increment the value above the cursor. Each press
of the RED button for less than 3 seconds will move the cursor one place through the
programmable setting of the displayed parameter. To store the new value press the RED
button for greater than 3 seconds, then on releasing the RED button the next parameter
for programming will be displayed. If no buttons are pressed within 10 seconds the
display will revert to its normal operation mode without saving the new value.
Example: To change the value on Rate 1 Unit Cost the sequence of events will be as follows:
STEP ACTION DISPLAY
Remove COMMAND card.
Insert a valued COMMAND Card.
Press and release the RED button for less than 3
seconds.
Press and hold the RED button for greater than 3
seconds to store the value.
Press and hold the RED button for greater than 3
seconds to store the value.
Press and hold the RED button for greater than 3
seconds to store the value.
Press and hold the RED button for greater than 3
seconds to store the value.
Press and hold the RED button for greater than 3
seconds to store the value.
Press and release the GREEN button until the correct
value is shown.
Press and release the RED button for less than 3
seconds to move the cursor one place through the
programmable setting of the displayed parameter.
Press and hold the RED button for greater than 3
seconds to store the settings.
Press and hold the RED button for greater than 3
seconds to store the settings.
Press and hold the RED button for greater than 3
seconds to store the settings.
Press and hold the RED button for greater than 3
seconds to store the settings.
Press and hold the RED button for greater than 3
seconds to store the settings.
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PROGRAMMING
Please Remove Card
Date and Time
DD/MM/YY HH:MM
Date and Time
DD/MM/YY HH:MM
Zero credit
No Yes
Set Credit
£XXX.XX
Emergency Credit
£XXX.XX
Emergency Credit Avail
£XXX.XX
Rate 1 Unit Cost
£XXX.XX
Rate 1 Unit Cost
£XXX.XX
Rate 1 Unit Cost
£XXX.XX
Rate 2 Unit Cost
£XXX.XX
Standing Charge
£XXX.XX
Operational Mode
Meter Timer
Factory Defaults
No Yes
Exiting Programming
7