RDL MCM-030, Руководство пользователя

Страница: 4 / 20

METER MODE
1. INTRODUCTION
1.1 Overview
This manual covers the specification and operation for the MCM-030 single phase
prepayment magnetic card meter and timer for operating in METER MODE.
The main features of the product are:
1) All solid state with 2 x 16 character LCD.
2) Uses secure disposable magnetic token cards available in Sterling, Euro and Dollars.
3) When valid token card is inserted, value credit is copied from the card to the meter.
4) Multiple cards may be entered in one session.
5) Card is erased and permanently marked.
6) User settable cost per unit for Rate 1 and 2 in the range £0 to £99.99.
7) Programming command card allows settings to be easily changed.
8) Standing Charge.
9) Emergency Credit.
10) Up to 2 tariff rates.
11) Switching capacity up to 100A.
12) No battery replacement required.
13) Internal Real Time Clock with programmable switching.
14) Reverse Energy Detection.
15) Extension Terminal Cover to Protect Supply Cables.
2. TECHNICAL DATA
The MCM-030 is an alternating Current Static Watt Hour Meter, Class B, with
programmable timer function facility. Double Insulated.
2.1 Meter LED & Power Registration Security
The red LED mounted on the front panel will pulse at a rate of 1000 pulses per kWh.
Power registration is recorded in non-volatile memory under control of the
microprocessor which is updated every 24 hours and in the event of a power failure.
There are separate registers for each rate.
2.2 Main Contactor
Contactor Current Rating: 100 Amps
Terminal Arrangement: BS 7856
Main Terminal Dimensions: 8.0mm to 8.2mm
Terminal Construction: Solid Brass
Terminal Screws: 6.0mm
2.3 Power Supply
Rated Voltage: 230V
Operating Voltage Range: 220V-240V
Current Range: 20 to 100A Standard
Frequency: 50Hz Standard
2.4 Metrology
Meter Accuracy: Active energy, Class B (1%)
2 15
TIMER MODE
(CONT.)
4.3 Date and Time
The following date and time parameters are settable:
Day, Month, Year, Hours, Minutes.
4.4 Zero Time Credit
Manually reset credit to zero.
4.5 Token Value
The amount of time credited for each token card inserted is settable in the range
0 to 599 minutes.
4.6 Maximum Time
The maximum credit is settable in the range 0 to 1440 minutes at which point the
display will change to Maximum Reached.
4.7 Tournament Mode Override
In this mode the timer dispenses electricity without the consumer needing to enter
token cards.
4.8 Operational Mode Meter or Timer
The timer mode setting operates at cost per time of electricity or meter mode at cost
per kWh unit of electricity.
4.9 Area Code
The area code can be factory set in the range 0-255 (Decimal).
5 APPENDIX
5.1 Wiring Diagram and Mounting Template
This timer must be installed by a competent, qualified electrician to the standards that
satisfy the requirements of the current Institute of Electrical Engineers (IEE).
WIRING DIAGRAM WALL MOUNTING
TEMPLATE
METER
ACCOMMODATES
SCREW SHANK UP
TO 5.2MM
52 52
138
TOP
MAIN
LOAD
PHASE
NEUTRAL
LINE
NEUTRAL
PHASE
RDL Meter-Timer Instruction 20/8/14 12:15 Page 3
METER MODE
1. INTRODUCTION
1.1 Overview
This manual covers the specification and operation for the MCM-030 single phase
prepayment magnetic card meter and timer for operating in METER MODE.
The main features of the product are:
1) All solid state with 2 x 16 character LCD.
2) Uses secure disposable magnetic token cards available in Sterling, Euro and Dollars.
3) When valid token card is inserted, value credit is copied from the card to the meter.
4) Multiple cards may be entered in one session.
5) Card is erased and permanently marked.
6) User settable cost per unit for Rate 1 and 2 in the range £0 to £99.99.
7) Programming command card allows settings to be easily changed.
8) Standing Charge.
9) Emergency Credit.
10) Up to 2 tariff rates.
11) Switching capacity up to 100A.
12) No battery replacement required.
13) Internal Real Time Clock with programmable switching.
14) Reverse Energy Detection.
15) Extension Terminal Cover to Protect Supply Cables.
2. TECHNICAL DATA
The MCM-030 is an alternating Current Static Watt Hour Meter, Class B, with
programmable timer function facility. Double Insulated.
2.1 Meter LED & Power Registration Security
The red LED mounted on the front panel will pulse at a rate of 1000 pulses per kWh.
Power registration is recorded in non-volatile memory under control of the
microprocessor which is updated every 24 hours and in the event of a power failure.
There are separate registers for each rate.
2.2 Main Contactor
Contactor Current Rating: 100 Amps
Terminal Arrangement: BS 7856
Main Terminal Dimensions: 8.0mm to 8.2mm
Terminal Construction: Solid Brass
Terminal Screws: 6.0mm
2.3 Power Supply
Rated Voltage: 230V
Operating Voltage Range: 220V-240V
Current Range: 1.0-20(100A)
Frequency: 50Hz Standard
2.4 Metrology
Meter Accuracy: Active energy, Class B (1%)
2