RDL MCM-030, Руководство пользователя

Страница: 10 / 20

METER MODE
(cont.)
4.2 Factory Defaults Reset
DISPLAY REMARKS FACTORY DEFAULTS
Factory Defaults
No Yes If Factory Defaults are reset then the following
parameters are changed:
a Current Credit
b Emergency Credit Left
c Current Debt
d Total Credit
e Total Cards
f Standing Charge per 24 hours
g Rate 1 unit cost
h Rate 2 unit cost
i Emergency Credit Value
j Emergency Credit availability point
k Reverse Energy Detection “RED” when displayed
£0.00
£1.00
£0.00
£0.00
0
£0.00
£0.15
£0.15
£1.00
£0.50
“RED” Not Displayed
4.3 Date and Time
The following date and time parameters are settable: Day, Month, Year, Hours, Minutes.
4.4 Zero Credit
Manually reset Debt and Credit to zero.
4.5 Set Credit
Manually set credit in the range of £0 to £999.99.
4.6 Emergency Credit Value
The emergency credit is settable in the range of £0 to £99.99.
4.7 Emergency Credit Available Point
The emergency credit available point is settable in the range of £0 to £99.99.
4.8 Cost per Unit for Rate 1 and 2
The cost per unit of electricity for each of the 2 rates is settable in the range £0 to £99.99.
4.9 Standing Charge per 24 hours
The standing charge is settable in the range £0 to £99.99 and is factory set to deduct the
value set every 24 hours at midnight.
4.10 Operational Mode Meter Timer
The meter mode setting operates at cost per kWh unit of electricity or timer mode at cost
per time of electricity.
5. APPENDIX
5.1 Starting Current
The meter starts to register at 80 mA.
5.2 Wiring Diagram and Mounting Template (shown overleaf)
The meter must be installed by a competent, qualified electrician to the standards that
satisfy the requirements of the current Institute of Electrical Engineers (IEE).
8