6
6
IR LED
Infrared LEDs provide viewing in no/low light conditions.
7
Bracket
Use the bracket to mount the camera on a wall or other flat
surfaces.
8
Camera antenna
Receives & Sends signals to or from the Monitor.
9
Pair button
The pair button is located on the back of the camera. Press pair
button when monitor is in pairing mode.
10
Light sensor
Sensing light and give order to the IR cut to switch between
daytime and night vision mode.
11
Deterrent light
Deterrent light flashes when motion detected.
3.
Set up the Hardware
3.1 Monitor
1. Flip out the stand on the back of the monitor and position the antenna.
2. Insert the micro SD memory card into the card slot on the monitor until you
hear a
“click”.
3. Connect an AC adapter to the power input on the back of the monitor.
Connect the other end of the adapter to a standard indoor power outlet.
4. Turn on monitor using the power switch.
5. The monitor displays the start up UI for a few seconds and then transitions to
the LIVE view.
3.2 Camera
3.2.1 General
The cameras included with your monitor are weatherproof and have an IP66
rating. Water can be sprayed on them and they will still work; however, the
cameras cannot be submerged.
The cameras can be exposed directly to the rain, it is recommended that, if they