RDC GSM-ICE3, Руководство по установке

Страница: 6 / 16

Programming mode [*][9][9][9][9 (default)
Communicator programming
st
1 Telephone number
st
1 digit [4][3][*][1][*]
nd
2 digit [4][4][*][2][*]
st
1 digit [4][8][*][1][*]
th
4 digit [5][1][*][4][*]
Account code
Communicator format
th
4 digit [4][6][*][4][*]
nd
2 digit [4][9][*][2][*]
Contact ID protocol [4][7][*][6][*]
rd
3 digit [4][5][*][3][*]
rd
3 digit [5][0][*][3][*] .
Go into programming
Exit and save [#][#][#]
Away arm/disarm using Relay1
Zone8 used as example.
Select Zone8 [8][*]
Note that the exit delay need not be
programmed as this will instantly arm the
system in away mode.
Zone option K/S arm/disarm [5][*]
AC AC - GND - GND +
TX
Siren 12V K/P Zone 7 COM Zone 8 1 2 3 4 5
Phone Phone Line Earth Line
IDS 805
18V AC Zones
Dialer board
Relay 1 Relay 1 Relay 2
RELAY EXPANDER GSM GATEWAY
DEOL Connection
Zone resistor
Tamper resistor
SEOL Connection
NOTE:
Stay mode key switch arm/disarm via the
app is not supported on this panel.
Stay arm/disarm can be done via the keypad.
Although not functional, the away arm
function is still shown in the mobile app.