RDC GSM-ICE3, Руководство по установке

Страница: 10 / 16

Programming mode [1][2][3][4] Menu 9
Communicator programming
Save [Yes/Arm]
UDL and DIGI options [7][0]
Reporting protocol [2]
2 Dial in DTMF on
5 Auto test on
Reporting event [5]
Account code [1] 1234 [Yes/Arm]
Telephone no. [0] 1234 [Yes/Arm]
As default all options are already selected
Dialling attempts [3] Default value
Reporting partitions [4]
832/412
Save [Yes/Arm]
ARC no.1 settings [7][1]
Ensure the relevant partitions in use are
displaying on the keypad. If it's not displaying,
press 1,2,3,4 and switch them on.
Select protocol options [8][2]
1 Enable comms on
Save [Yes/Arm]
Contact ID [4]
8 Blind dial on
Away arming
Force arming [1][4] on (all Zones)
Set on for all Zones, this option default is off.
Select Zone8 [0][8]
Zones7-8 used as example.
Away and stay arm/disarm using Relay1&2
Go into programming [1][1]
Key switch arm/disarm [1][6]
Set the zone attributes [1][5]
Select Zone8 [0][8]
Confirm [Yes/arm]
Return to main location [Menu]
Note: Exit delay need not to be programmed.
Stay arming
Go into programming [1][1]
Return to main location [Menu]
Miscellaneous 1 [4][Yes
Any zo]ne eg Zone7 [0][7] [1][6][n][g]
Ensure 4=off to report stay arm/disarm.
Force arming [1][4] on (all Zones)
Set on for all Zones, this option default is off.
Zone attributes [1][5]
Select Zone7 [0][7]
Instant stay on Zone7 [4]
Confirm [Yes/arm]
Note: Exit delay need not to be programmed.
Return to main location [Menu]
Exit and save [9
]
Relay 1 Relay 1 Relay 2
+
-
RELAY EXPANDER GSM GATEWAY
AC Bell DA
T
A
+
AUX
-
AUX
Zone 7 COM Zone 8 Input Siren OUT
Zones
R-1
T-1
R
T
GND
TEXECOM 412/832
Zone resistor
Tamper resistor
DEOL Connection SEOL Connection