Gateway connections & reporting
POS
NEG
IP1
RX
IP2
AC
TX
CID
Input 2 / AC
(select J1)
DC ( )
+
TX
DC (-) /
RING
TIP
RX
Input 1
Input 2 jumper
With jumper
- AC monitoring
Without jumper
- Input 2
To panel serial
Green
Amber
Red
GSM
activity
Input 1
(IP1)
- fixed functio
n
J1 jumper off
- IP2 function selected
- Wireless panic button receiver
External resistor - not required
Default trigger
- positive pulse
- Electric fence relay output
- Fixed panic button
Additional hardwired inputs x2
Input 2
(IP2/AC)
- dual function
- Alarm panel PGM
Input delay
- 100ms fixed
AC delay
- 10 minutes - fixed
J1 jumper on
- AC function selected
AC function monitors mains fail/restore.
Connect
TIP
and
DC(-)
as per individual
panel diagram for Contact ID reporting.
Dialler capture/Contact ID
AMBER - GSM
LED Indications
Off No GSM link
Blip Server request (1x/3sec)
Fast flashing Negotiating (5x/sec)
Slow flashing Connected to server (1x/sec)
GREEN - General
RED - Server
Off Restarting connectivity
Fast flashing Searching for network
Variable timing RSSI signal strength
- on longer = stronger
- on shorter = weaker
Slow flashing GSM link active
Solid GSM network established
Off No server connection
Battery monitoring and reporting
Reports battery low/battery restore.
Battery low
- below 10.8V.
Battery restored
- above 12.5V.
Connection
- none required
Central station software generates alert on
polling communication failure.
Connection
- none required
Polling/auto test
Patented “always-on” network supervision.
No auto-test/self-test reporting needed.
