RDC5121 Control System Manual
SHENZHEN RUIDA TECHNOLOGY
13
:
Set the relative origin;
:
To track by the current file’s frame;
:
Let the Laser to splash;
:
To stop work, or to exit to some menu;
:
Validate the change;
:
The Z/U key can be pressed when the system is idle or the work is
finished. On pressing this key, it will show some entries in the interface, each entry
includes some functions, Z axes move. each axes to go home etc.;
:
To move the X axes or the left/right cursor ;
:
To move the Y axes or the up/down cursor ;
4.2 Introduction to the Main Interface
4.2.1 The main interface
When the system is powered on, the screen will show as below:
File: To display the running file
’
s file number
Figure 4.1
