RDC5121 Control System Manual
SHENZHEN RUIDA TECHNOLOGY
10
2. When the laser is a glass tube the laser power PWM terminal is
low level effectiv
e
, this pin will be connected with the laser power
PWM end and used to control the power of the laser.
5
LPWM-
Power control interface of laser/laser tube
1. When the laser is the RF laser, this pin will be connected with
the laser RF-PWM end;2. When the laser is a glass tube the laser
power PWM terminal is high level effectiv
e
, this pin will be
connected with the laser power PWM end and used to control the
power of the laser.
6
L-AN1
An analog signals. this pin connected with the power control end of
the laser power.
Please correctly select the laser type in the factory parameters.
Prompt
