RCI 186M, Руководство оператора, Страница: 22 / 72

21
Engage / Disengage Transport Lock
The transport lock is located at the left side
of the implement.
Before disengaging the transport lock,
disengage tractor, release all hydraulic
pressure, put the tractor in park, shut off the
engine, and remove the key from the
ignition.
Disengage the transport lock (Key 1, Figure
13) by moving the lock to a raised position.
To engage the transport lock, first disengage
tractor, release all hydraulic pressure, put the
tractor in park, shut off the engine, and
remove the key from the ignition.
Move the transport lock (Key 1, Figure 13)
to a lowered position.
Return to the tractor and start the unit while
following the General Safety Precautions on
Page 8 of this manual.
Raise the pickup to the highest position to
allow the transport lock to fall into place.
Verify the transport lock is engaged.
Raise / Lower Extension
The extension is raised and lowered using
the same hydraulic circuit as the pickup
raise / lower circuit.
The extension raise / lower function is
enabled or disabled by use of a hand-
controlled hydraulic valve located on the
tongue near the jack stand storage location.
To raise the extension, first ensure there is
no hydraulic pressure in the system.
WARNING: Hydraulic systems at rest may
contain hydraulic pressure. Do not
disconnect or service hydraulic systems with
pressure in the system. Relieve all pressure
before performing any service work.
Beware of components that may move when
changing selections with valves or removing
locking mechanisms. Failure to do so may
result in serious injury.
Turn the hydraulic valve to the OPEN
position. See Figure 14.
When in the OPEN position, the extension
will fold up when the pickup is raised. The
extension will also fold down once the
pickup is lowered completely and the
operator continues to operate the pickup
lower function.
IMPORTANT
Close the hydraulic valve when it is not
desired to have the extension raise or lower.
Figure 13. Transport Lock
Key 1 - Transport Lock (Lowered Position)
Figure 14. Hydraulic Valve
Key 1 - Valve OPEN