RCH Walle Mec, Руководство по эксплуатации

Страница: 66 / 70

66
14 ERROR MESSAGES LIST
CODE
DESCRIPTION
E01
“VALUE NOT VALID [CL] ”
It Indicates that the last key pressed is not matching the
current procedure
E02
“WRONG FUNCTION Press [CL] "
It indicates an error in the current procedure. Press CL and
verify again the entering of the data.
E03
“WRONG DATE Press [CL] "
The format of the date entered is incorrect (ref. to chapter 6.8)
E04
"WRONG TIME Press [CL] "
The format of the hour entered is incorrect (ref. to chapter 6.8)
E05
"WORD TOTALE NOT ADMITED [CL] "
It is not possible to program a word including the word
TOTALE.
E06
"BARCODE WRONG [CL] "
It Indicates that the barcode entered is wrong. Press CL and
verify the code again.
E07
"FISCAL CODE WRONG [CL] "
It Indicates that the barcode entered is wrong. Press CL and
try again.
E10
"MMC FORMAT NOT CORRECT! [CL] "
It Indicates that the SD entered is other than the type
supplied. Enter only SD supplied.
E11
“MMC ALREADY USED! [CL] "
It Indicates that the (electronic journal) inserted is not brand
new. Insert another brand new SD.
E12
"E.J. ABSENT OR WRONG [CL] "
It indicates that SD is missing (electronic journal), or that the
E.J. cumulative number is wrong. Insert a new SD or the
proper E.J..
E14
“MMC WRITE ERROR!”
It indicates that an error occurred during the writing of the
data onto the electronic journal (E.J.). Switch off and switch
on again the cash counter, fully cancelling the current receipt
(Receipt void). Should the problem appear several times,
contact the service centre.