RCH Walle Mec, Руководство по эксплуатации

Страница: 32 / 70

32
6.12 KEY BEEP
In PRG (4 + KEY) press [IZN] until Key Beep is displayed.
Press [SK.NAUDA] to start the programming:
Choose through the keys [IZN]
and [%-] if you want (or not)
key sound, then press
[SK.NAUDA].
Once left the PRG “
Key Beep
” function, press [ATM] to go back to PRG
function, or continue the programming.
6.13 PROGRAMMING RECAPITULATION
In PRG (4 + KEY) press [IZN] until Setting Summary is displayed. Press
[SK.NAUDA] to get the printout of the programming done.
6.14 PLU RECAPITULATION
In PRG (4 + KEY) press [IZN] until PLU Summary is displayed. Press
[SK.NAUDA] to get the printout of all programmed PLU.
6.15 DISCOUNT
In PRG (4 + KEY) press [IZN] until Discount (Decrease).
Press [SK.NAUDA] to start programming the value to associate
to key [-EUR] :
Enter the discount value and press
[SK.NAUDA].
The display exits the programming by displaying again “ Discount”
. To exit
the function, press the key [ATM].
ENABLE KEY BEEP?
<YES>/ NO
REDUCTION?
2,00