67
E15
“RTC ERROR”
It indicates that during the receipt or Z daily report, the
system current date is different more than a year, compared
to the last Z daily report in fiscal memory. Contact the service
center for hardware verification and system recovery.
E20
"WRONG SEQUENCE Press [CL] "
It indicates that the pressure onto the last pressed key is
incorrect in the sequence of the current commands.
E21
“OPERATION NOT ADMITED! [CL] "
It indicates that the last operation performed is not allowed by
the current procedure.
E22
“ITEM NOT FOUND [CL] "
It indicates that the item code (PLU) entered is not in the cash
counter memory. Verify the code.
E23
"CONTROL KEY MISSING [CL] "
It means that one or more mandatory keys are missing. The
mandatory keys (or control keys) are:
[SK.NAUDA], SUBTOTAL
,
[IZN]
,
% -
and receipt Void.
They must always be present.
E30
"E.J. FULL! Press [CL] "
It indicates that the electronic journal (SD) is finished. Replace
SD (refer to chapter 13).
E31
"E.J. NEAR FULL [CL] "
It indicates that the electronic journal (SD) is almost full and
that must be changed the soonest possible (refer to chapter
13).
E32
“EXT. DGFE NOT PRESENT”
It indicates that the electronic journal (SD) is not inserted. You
must insert it.
E33
“EXT. DGFE REMOVED”
It indicates that during the procedure, the electronic journal
(SD) as been removed. You must power OFF the machine.
Insert SD and power ON the ecr.
E40
"NEGATIVE RECEIPT [CL] "
The Cash counter accepts that the subtotal may be negative.
However, it prevents the receipt from being closed. Sell
further items to close the receipt at zero or with a positive
balance.
E41
"OVERFLOW RECEIPT [CL] "
The amount of the current receipt has exceeded the allowed
limit. Cancel the receipt or close it and open a new one
concerning the non-registered items.
Содержание Walle Mec
Страница 1: ...OPERATING MANUAL...
