8
ENGLISH
COM 60W 30W 15W 7.5W
100V
8 Ω
COM
+
-
TERMINAL STRIP CONNECTION
The + / – terminals allow to connect both input and output cables (to link other speakers
in parallel).
Applicable wire section: from 1 mm² to 4 mm².
1.
Insert the input cable through one of the two rear cover cable guides.
2.
Connect the positive wire of the 100 / 70 V line to the s input.
3.
Connect the negative wire of the 100 / 70 V line to the speaker – input.
4.
If necessary, connect in the same way the output cable (passing it through the other
rear cover guide) to link other speakers in parallel.
INTERNAL TRANSFORMER POWER TAPPING
The internal transformer is connected to the ceramic
terminal strips by two wires with FASTON connectors.
Link the FASTON connector of the red wire coming
from the ceramic terminal strip to the transformer tap
indicating the selected power value
(among 60W – 30W – 15W – 7.5W).
If the line voltage is 70 V, the speaker power will be
halved.
Note: do NOT remove the other three FASTON connectors:
the two black wires linked to the COM pins and the red
one linked to the 8 Ω pin.
100
/70 V
+
–
0
