RCF M 20X, Быстрый старт

Страница: 10 / 24

IT
ALIANO
ENGLISH
10
SETUP
This section explains how to set up the M 20X digital mixer the first time you turn it on.
Configure Mixer Menu
Press the SYSTEM key, go to the UTILITIES > CONFIG MIXER page, and set the M 20X boot mode.
If LAST STATUS is enabled, at power-up the M 20X will load all the settings available before turning off the unit. This is
the preferred option. If LAST STATUS is disabled, the mixer will boot with the default initialization.
If you press and hold the FACTORY RESET button, you can reset the console to the default initialization, erasing the
current show, every stored show and every stored preset.
If you want to initialize the console and maintain your saved shows, presets and global settings, press the SYSTEM key
and on the page SHOW, hold pressed DEFAULT option.
A SHOW includes all parameters pertaining to inputs, outputs and IO Routing, except the global configuration parameters.
For details on the Faders Calibration and Brightness adjustment, please refer to the User Manual.
M 20X
DIGITAL MIXER