RCF FORUM6000 Скачать руководство пользователя страница 28

ENGLISH

Before connecting and using this product, please read this instruction manual carefully and keep 
it on hand for future reference. The manual is to be considered an integral part of this product and 
must accompany it when it changes ownership as a reference for correct installation and use as well 
as for the safety precautions.

RCF  S.p.A.

  will  not  assume  any  responsibility  for  the  incorrect  installation  and  /  or  use  of  this 

product.

WARNING

: to prevent the risk of fire or electric shock, never expose this product to rain or humidity 

(except in case it has been expressly designed and made for outdoor use).

SAFETY PRECAUTIONS

1. 

All the precautions

, in particular the safety ones, 

must be read with special attention

, as they 

provide important information.

2.1 POWER SUPPLY FROM MAINS (direct connection)

a.

  The  mains  voltage  is  sufficiently  high  to  involve  a  risk  of  electrocution;  therefore, 

never 

install or connect this product with the power supply switched on.

b.

  Before powering up, make sure that all the connections have been made correctly and the 

voltage of your mains 

corresponds to the voltage shown on the rating plate on the unit

if not, please contact your 

RCF dealer

.

c.

  The metallic parts of the unit are earthed by means of the power cable.

 

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a 
protective earthing connection.

d.

  Protect the power cable from damage; make sure it is positioned in a way that it cannot be 

stepped on or crushed by objects.

e.

  To prevent the risk of electric shock, 

never open the product

: there are no parts inside that 

the user needs to access.

2.2 POWER SUPPLY BY MEANS OF AN EXTERNAL ADAPTER

a.

  Use the dedicated adapter only; verify 

the mains voltage corresponds to the voltage 

shown  on  the  adapter  rating  plate  and  the  adapter  output  voltage  value  and  type

 

(direct / alternating) 

corresponds to the product input voltage

, if not, please contact your 

RCF dealer

; verify also that the adapter hasn’t been damaged due to possible clashes / 

hits or overloads.

b.

  The mains voltage, which the adapter is connected to, is sufficiently high to involve a risk 

of electrocution: pay attention during the connection (i.e. never do it with wet hands) and 
never open the adapter.

c.

  Make sure that the adapter cable is not (or cannot be) stepped on or crushed by other 

objects (pay particular attention to the cable part near the plug and the point where it leads 
out from the adapter).

2.3 INFORMATION ABOUT BATTERIES

• Use always rechargeable batteries as indicated on present manual.
• Verify the batteries’ polarity is correct.
• Do NOT short-circuit batteries (i.e. by connecting the 2 poles together with a metallic wire)
• Throw empty batteries into dedicated garbage can, according to the present laws (of your 

country) about ecology and environment protection.

3.

 Make sure that no objects or liquids can get into this product, as this may cause a short circuit.

This apparatus shall not be exposed to dripping or splashing. No objects filled with liquid, such as 
vases, shall be placed on this apparatus

4. 

Never attempt to carry out any operations, modifications or repairs that are not expressly described 

in this manual. 

Contact your authorized service centre or qualified personnel should any of the following occur:

•  the product does not function (or functions in an anomalous way);
•  the power supply cable has been damaged;

IMPORTANT NOTES

Содержание FORUM6000





















































Отзывы: