RCF DXT 3000, Руководство пользователя, Страница: 9 / 40

9
BGM JUMPER
Set the BGM Jumper BGM on the main board of all the units as described below:
•
jumper set to LOCAL (Left) for the MASTER unit. In this way the MASTER unit selects as input of the BGM
Channel the connector BGM IN on the main board (recommended).
When the BGM jumper is set to ITL for the MASTER unit, it is enabled as input of the BGM channel the
BGM IN connector on the IE 3008 Board (or IT 3010 if present). The connector BGM IN present on the
main board in this case is disabled.
•
for every SLAVE unit, set the JUMPER to LOCAL if you wish to use the BGM player of the SLAVE unit itself;
set the JUMPER to ITL if you wish to use the same BGM channel coming from the MASTER unit.