RCF DXT 3000, Руководство пользователя, Страница: 7 / 40

7
2. SETTINGS
The following settings must be made on the MASTER and SLAVE units with all the SYSTEM TURNED OFF,
without primary 230VAC power supply and with batteries disconnected.
The settings are a combination of Jumpers (to be moved or to be installed) and Dip Switches on different boards
inside the DXT 3000 units.
2.1. MAIN BOARD
Install 2 jumpers above the message board, as indicated in the following picture. (These 2 jumpers are not
present in the single DXT 3000 unit, but they are included with the IE 3008 Board).
If console BM 3804 / BM 3804FM is used, set the dip switch #1 (LOCAL BM 380X) to ON (right position).