RCBS 98940, Инструкция по эксплуатации продукта

Страница: 10 / 64

10
DISPENSING MODE:
Step 1 . Use the number keys to key in the desired weight, and press [ GO ] key to start the
dispensing process. The decimal point must be used to enter charges using tenth grain
increments. (e.g., 45.5) Use [ CANCEL ] key to clear the value and re-enter the charge.
Note: To discard the entered desired weight, please press [ ZERO ] key and return to scale
mode.
Note: the valid values: 2.0 – 999.9, and 1000-2000
Step 2 . After the dispenser has finished dispensing the charge, press [ GO ] key again to
dispense the same weight again. Continue this process as long as you do not want to
change the powder charge.
Step 3 . If you need to change the weight, key in the new weight as in Step #1 and press
[ GO ] key.
Step 4 . If you are dispensing powder and wish to exit dispensing mode, press [ CANCEL ]
key.
Step 5
. To change the dispensed weight value in dispensing mode, the [
TRICKLE
] key
may be used to fine-tune the exact value. For example, 10.0GN is the first dispensing
weight, press [
GO
] key to start the dispensing process. After the dispensing process, press
[
TRICKLE
] key to keep dispensing till 12.5GN.
MANUALLY DISPENSING OPERATION WITH TRICKLE KEY:
Press [ TRICKLE ] key to dispense the powder slowly. Release [ TRICKLE ] key to stop
dispensing.
AUTOMATIC DISPENSE MODE:
The improved ChargeMaster Lite has been outfitted with an Auto-Dispense feature. This
allows powder charges to automatically dispense from the unit once an empty scale pan is
placed onto the unit.
Step 1 . Press and hold [ MODE ] key until the display shows “Auto”
Step 2
. Enter the desired charge and press [
GO
] key to dispense the first charge.
Step 3 . Return the empty scale pan onto the scale platen. When the display shows “0.0” the
Dispenser will automatically dispense the charge.
Step 4 . Return to the normal operating mode. Press and hold [ MODE ] key until the display
shows “Manual”.