50
OTHER FEATURES
For example, if you record a 30-minute program at the
beginning of the tape and you want to go to the end of
that program to begin another recording, you would:
1.
Press INFO
twice
to display the time counter.
2.
Press CLEAR to reset the time counter to 0:00:00.
3.
Press FWD to forward the tape until the time counter
reads 0:30:00.
4.
Press STOP. This is the approximate end of the program.
(You may want to press PLAY to verify.) Now, you can
begin recording at this spot.
5.
Press INFO twice to remove the time counter from the
screen and return to the normal display mode.
On-screen Displays
The INFO button shows the status of the VCR (STOP, PLAY,
RECORD, etc.), channel number, time counter, date, time, and
tape speed on the TV screen. The date and time must be set
before they can be displayed.
1.
Press INFO to see the on-screen displays.
2.
Press INFO again to have only the time counter remain
on the screen.
3.
Press INFO again to have no displays appear on the
TV screen. This is useful for dubbing tapes.
Turning off the VCR also resets the displays.
Stop Ch 05 0:30:00
11/18/97 Tue 01:30PM SLP
SECONDS
MINUTES
HOURS
0:30:00
1
2
3
Time counter only (does not time out)
On-screen display (times out)
No displays will appear (useful for dubbing)
