FCC Information
1
EN
Service
This product should be serviced only by
those specially trained in appropriate
servicing techniques. Attach your sales
receipt to the booklet for future
reference or jot down the date this
product was purchased or received as a
gift. This information will be valuable if
service should be required during the
warranty period.
Purchase Date
_________________________
Name of Store
________________________
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
In accordance with FCC requirements,
changes or modifications not expressly
approved by Thomson multimedia Inc.
could void the user’s authority to
operate this product.
This device generates and uses radio
frequency (RF) energy, and if not
installed and used properly, this
equipment may cause interference to
radio and television reception.
If this equipment does cause
interference to radio or television
reception (which you can determine by
unplugging the unit), try to correct the
interference by one or more of the
following measures:
• Re-orient the receiving antenna (that
is, the antenna for the radio or
television that is “receiving” the
interference).
• Move the unit away from the
equipment that is receiving
interference.
• Plug the unit into a different wall
outlet so that the unit and the
equipment receiving interference are
on different branch circuits.
If these measures do not eliminate the
interference, please consult your dealer
or an experienced radio/television
technician for additional suggestions.
Also, the Federal Communications
Commission has prepared a helpful
booklet, “How To Identify and Resolve
Radio TV Interference Problems.” This
booklet is available from the U.S.
Government Printing Office,
Washington, DC 20402. Please specify
stock number 004-000-00345-4 when
ordering copies.
3712 US IB(EN)
11/12/01, 5:05 PM
2
