Setup and Connections
11
DVD Player
+
TV
+
VCR
The following is one possible connection if you want to include
a VCR in your connection scheme.
To Connect the DVD Player
1. Use audio/video cables to connect the player’s left and
right AUDIO OUT jacks to the TV.
2. Use a video cable to connect the player’s VIDEO OUT jack to
a TV (or the S-video cable to connect the S-VIDEO OUT jack,
if your television has an S-Video input).
To Connect the VCR
1. Connect the off-air antenna or cable to the antenna input
on the VCR.
2. Use a coaxial cable to connect the antenna output on the
VCR to the antenna input on the television.
To Watch DVD
Tune your television to either the Video or S-Video input
channel. Consult your television manual for specific details.
To Watch VCR
Tune your television to channel 3 or 4 depending on how you
set the CH3/4 switch on the back of the VCR.
CAUTION
Do not stack electronic components or
other objects on top of the DVD player.
See Safety Information, inside front
cover.
DVD TV + VCR
Consult the owner’s manuals of the
additional components you are
connecting for more detailed
connection information for those
particular components.
R
VIDEO
OUT
AUDIO OUT
L
S-VIDEO
OUT
COAXIAL
DIGITAL
AUDIO OUT
OR
L
R
VIDEO
AUDIO
ANT IN
S-VIDEO
TV
DVD
PLAYER
CABLE
OR
OFF-AIR SIGNAL
L
R
VIDEO
AUDIO
IN FROM ANT
IN
OUT
OUT TO TV
L
R
VCR
OR
DVD Copy Protection
Many DVD discs are encoded with copy
protection. Because of this, you should
only connect your DVD player directly
to your TV, not to a VCR. Connecting
to a VCR results in a distorted picture
from copy-protected DVD discs.