manualshive.com logo in svg

RCA Professional series, Руководство пользователя

Поделиться
Скачать
RCA Professional series Скачать руководство пользователя страница 35

Setting Up the Receiver

35

Use

 or 

 to specify the

crossover frequency for your small
speakers (100 Hz, 150 Hz or 200
Hz).

X.OVER100

X.OVER150

X.OVER200

100 Hz

Sends bass frequencies below 100 Hz to the
subwoofer (or 

L

 speakers).

150 Hz

Sends bass frequencies below 150 Hz to the
subwoofer (or 

L

 speakers).

200 Hz

Sends bass frequencies below 200 Hz to the
subwoofer (or 

L

 speakers).

Note:

If all speakers (front, center, and surround)
are set to 

L

, the crossover frequency cannot

be set because there are no 

S

 speakers (

appears in the display).

LFE Attenuator Setting

Default setting: 

0 dB

Dolby Digital and DTS audio sources
include ultra-low bass tones. Set the LFE
attenuator as necessary to prevent the ultra-
low bass tones from distorting the sound
from the speakers.

Use

 or 

 to set the attenuation

level (0 dB, 10 dB or   dB(

∞

)).

0 dB

10 dB

∞

(displays

)

Note:

When

∞

 is selected (   appears in the

display), LFE is not available.

Front Speaker Distance
Setting

Default setting: 

10 ft.

Sets the distance from the front speakers to
the listening position.

Use

 or 

 to set the distance of the

front speakers from the main
listening position (within a 30 foot
range).

Center Speaker Distance
Setting

Default setting: 

10 ft.

The center speaker is normally placed
directly in the front of the listening room
and closer to the listening position than the
front speakers. This means that the sound
from the center speaker will be heard before
the front speakers. To prevent this, set the
center speaker distance setting to delay the
sound from the center speaker so that the
sound from the front and center speakers
will be heard at the same time.

Use

 or 

 to set the distance of the

center speaker from the main
listening position (within a 30 foot
range).

Note:

When

C

 is selected in the speaker setting,

the center distance cannot be set.

Surround Speaker Distance
Setting

Default setting: 

10 ft.

Like the center speaker, you should set the
distance of the surround speakers accurately
to hear sounds coming from both front and
surround speakers at the same time.

31_5021.RCA.33.37

03.3.17, 8:25 PM

35

Содержание Professional series

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды