
34
Setting Up the Receiver
6 When you are done, press
ENTER
to exit.
Note:
The setting display is automatically exited
after 20 seconds of inactivity.
Speaker Setting
Default setting:
S
(all speakers)
You must let the receiver know how many
speakers you have, and how big they are.
The size you choose (large or small)
determines how much bass is sent from the
receiver to the speakers.
In the display,
F
,
C
, and
S
refer to front,
center, and surround speakers respectively.
Speaker size is denoted as
L
for large
speakers,
S
for small speakers, and
(asterisk) if no speaker is connected.
Cycle through the available choices
using
or
and choose a
configuration that matches your
speaker setup.
One of the following configurations should
match your setup:
FL-CL-SL
FL-CL-SS
FL-CL-S
FL-CS-SL
FL-CS-SS
FS-C -SS
FS-CS-S
FS-CS-SS
FL-C -SS
FL-C -SL
FL-CS-S
Notes:
• If the cone size (diameter) of the speaker
is larger than 5 inches, set the speaker
size to
L
.
• If you are not using a subwoofer, we
recommend setting the front speakers to
L
.
Subwoofer Setting
Default setting:
ON
You can choose whether the subwoofer is
used or not. Use the plus (
PLS
) setting for
extra bass.
Use
or
to select subwoofer
ON
,
PLS
or
OFF
.
Notes:
• If you chose the small front speaker
setting,
SUBWF ON
is automatically set
and locked.
• When you select the plus setting, you
will get the bass sounds from the
subwoofer even if the front speakers are
set to
L
.
Crossover Frequency Setting
Default setting:
100 Hz
Crossover frequency is the point where the
receiver divides the high and low sounds
(the frequencies) between the speakers.
Since most smaller speakers cannot handle
deep bass tones, you can send these sounds
to the subwoofer (or if you do not have a
subwoofer, the large (
L
) speakers in your
system) instead of the speakers set to small
(
S
) in your setup. Choose the point at which
you want the frequency routed to the
subwoofer (or
L
speakers).
We recommend setting this to
200 Hz
if
your
S
speakers are smaller bookshelf-type
speakers.
31_5021.RCA.33.37
03.3.17, 8:25 PM
34