12
5 Minute Guide
4 Plug in the receiver and switch it on, followed by your DVD player, your
subwoofer and the TV.
Make sure you have set the video input on your TV to this receiver. Check the manual
that came with the TV if you do not know how to do this.
Also make sure that
DVD/LD
is showing in the receiver’s display, indicating that the DVD
input is selected. If it is not, press
DVD/LD
on the remote control to set the receiver to the
DVD input.
5 Press
SETUP
on the front panel to specify your speaker setup and your
room size.
Use the
MULTI JOG
dial to select and
ENTER
to confirm your selection. See "Using the
Quick Setup" on the next page if you are unsure about the settings.
6 Play a DVD, and adjust the volume to your liking.
There are several other sound options you can select. See “Introduction to Sound Modes”
on page 28 for more on this. See also "Choosing Your Receiver Setup" on page 33 for
more setup options.
Note:
Depending on your DVD player or source discs, you may only get digital 2 channel stereo
and analog sound. In this case, the listening mode must be set to
STANDARD
(it should
already be set—see “Listening to Multi-Channel Playback” on page 30 if you need to do this)
if you want multi-channel surround sound.
31_5021.RCA.09.13
03.3.17, 8:24 PM
12
