RCA J22H760, Руководство пользователя

Страница: 16 / 184

Chapter 1: Connections and Setup
Chapter 1 16
Vesa Standard TV Mounts - 26/32/42 inches
General Guidelines: Choosing a location for
installing a VESA Standard Mount Typical Wall Stud Type Mount with Swivel Bracket
Be sure the style of stand selected is capable of
supporting the weight of the TV.
If the mount will be on a wall, a typical wooden
stud behind the wall board would be the pre-
ferred choice for a location to attach the wall
mount. The wall mount location chosen should be
appropriate for drilling holes and have available
the required power source as well as
antenna/cable and other equipment leads.
For pedestal-type mounts, a sturdy surface on a
desk or other similar flat table-like surface would
be the appropriate location for mounting a
pedestal-style TV stand. (Some stands are portable
and can be moved from one location to another.)
Be sure all safety considerations are followed.
Most stands are designed so that the wiring would
be threaded through the stand itself or a loop-
through style clamp so that the wiring is neatly
bunched and not strung in such a way as to create
a potential hazard to the user.
The following examples are VESA Standard 200mm wall mounts. Since there are numerous types of stands
and mounts available, only a few are shown here. Refer to the instructions provided with the TV stand that
will be used to mount the TV.
Note
- Image shown may differ from your TV.
- Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall
Mounting Instruction Guide.
Caution: Tightening wall mount screws that are too long could cause damage to the internal components of
this television.
Use M5 X “L” bolts to mount LCD. (“L” = Wall Mount bracket thi 0.5 inch or below for
J26H700/J32H700/J42H750)
You must use a UL listed wall mount or the DTI Services, LLC DTI-006 Wall Mount Bracket whenever Wall
Mounting this television.
A skilled person should be contacted to perform the installation of the television and wall mount.
Specification of a generic "UL Listed wall mount" should additionally include : minimum weight that the
mount must be able to support, minimum screen size that the mount must be able to support, instructions
furnished as part of the wall mount must be closely followed, the wall mount must be suitable to support
the type of television under consideration.