RCA HD61LPW62, Руководство пользователя

Страница: 31 / 80

Chapter 2 29
Using the Remote Control
INFO Brings up the Channel Banner with channel and viewing information. Press again to
remove the banner.
INPUT Toggles through the TV’s available input sources ( INPUT 1, INPUT 2, INPUT 3, Front
Input, HDMI/DVI, and last-active channel). To quickly access an input, press the INPUT button
and the input number, for example, INPUT + 1 to access INPUT 1.
MENU Makes
Main Menu
appear and disappear.
MUTE Reduces the TV’s volume to its minimum level. Press again to restore volume. The
Audio Output menu must be set to Variable Level, Speakers On to control the TV’s volume.
OK When a menu item is highlighted, press OK to select the item.
ON•OFF Turns the TV on or off. Your HDTV is equipped with a special lamp system. In order
to preserve the life of the lamp, the TV must warm up and cool down properly when you turn
the TV on and off. When you turn the TV off, the screen turns blue and fades to black. While
the screen is blue, you can still turn the TV back on. If the screen is black when you try to turn
it on, the TV’s lamp may be in its cool-down cycle. The TV’s audio comes on, then the picture is
displayed after a few moments.
In other modes (VCR, DVD, SAT•CABLE, AUX•HD, AUDIO), and if programmed, turns the
device on and off.
PRESETS Toggles through the Picture Presets for the input currently tuned to. The preset is
only temporarily changed and goes back to the original menu setting when you change channels
or inputs or turn off the TV.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport
control for some remote-controllable VCRs and DVD players.
SAT•CABLE (Satellite•Cable) Places the remote in SAT/CABLE box mode. If Auto Tuning
is enabled, turns on the TV and tunes it to the satellite or cable box Video Input Channel. This
button lights when you press a valid button in SAT•CABLE mode (see
Modes of Operation on
page 32 for more details).
SKIP Press once before changing channels and the TV returns to the original channel after 30
seconds. Press repeatedly to add more time. With no displays on-screen, press CLEAR to cancel.
SOUND On digital channels/inputs, toggles through the available Audio Modes. For analog
channels, toggles SAP on or off. If you change channels/inputs, the default for Audio Mode is
restored. Does not affect default menu settings for
SAP or Audio Mode .
TV Places the remote in TV mode. Turns on the TV and tunes to the last-viewed TV channel or
input. This button lights when you press a valid button in TV mode (see Modes of Operation on
page 32 for more details).
VCR Places the remote in VCR mode. If Auto Tuning is enabled, turns on the TV and tunes to
the VCR Video Input Channel. This button lights when you press a valid button in VCR mode
(see
Modes of Operation on page 32 for more details).
VOL – or VOL + Decreases or increases the TV’s volume. The TV
Audio Output
menu must be
set to Variable Level, Speakers On to control the TV’s volume.