RCA 25211 Скачать руководство пользователя страница 32

Страница: 32 / 36

Unit locks up and no communication between the base and

cordless handset

• Unplug the power adaptor from the electrical outlet and the bottom of the base. Remove

the handset battery. Wait for 30 seconds and plug the power adaptor back into the base
and electrical outlet. Reconnect the battery and charge for 14 hours.

Date/Time setting is restored to default setting

• May be caused by power failure. Set Date/Time again.

Caller ID Solutions

No Display

• Charge the battery (for 14 hours). Or replace the battery.

• Make sure the unit is connected to a non-switched electrical outlet. Disconnect the

power adaptor from the base and reconnect it.

No Caller ID

• You must be subscribed to the standard Name/Number Caller ID service from your local

telephone company to receive CID information.

Battery

If you experience any of the following problems, even after recharging the battery, you may

need to replace the battery pack:

• Short talk time

• Poor sound quality
• Limited range

General Product Care

To keep your unit working and looking good, follow these guidelines:

• Avoid dropping the handset, as well as other rough treatment to the phone.

• Clean the phone with a soft cloth.

• Never use strong cleaning agents, paint thinner, abrasive powder, alcohol, or other chemi

cal products to clean the unit. Doing so will damage the finish.

• Retain the original packaging in case you need to ship the phone at a later date.

• Periodically clean the charge contacts on the handset and base with a clean pencil eraser

Содержание 25211





































Результаты поиска

Содержание 25211

Отзывы:

Похожие инструкции для 25211

Бренды по названию

Популярные бренды

RCA 25211, Руководство пользователя

Результаты поиска

Содержание 25211

Отзывы:

Похожие инструкции для 25211

Бренды по названию

Популярные бренды