30
Changing The Battery
Handset battery
CAUTION: To reduce the risk of fire or personal injury, use only the Telefield NA
Inc. approved Nickel-metal Hydride (Ni-MH) battery model T-T104 (GP, 2.4V,
550mAh), which is compatible with this unit.
Headset battery
CAUTION: To reduce the risk of fire or personal injury, use only the Telefield NA
Inc. approved Li-Polymer battery Model T-T101 (A.E., 3.7V, 240mAh), which is
compatible with this uni
t.
1. Make sure the telephone is in standby mode (not in TALK mode) before you replace bat-
tery.
2. Remove the battery compartment door.
3. Disconnect the cord attached to the battery pack and remove the battery pack from the
handset.
4. Insert the new battery pack and connect the cord to the jack inside the battery compart
-
ment.
5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge. Allow the handset battery
to properly charge (for 14 hours) prior to first use or when you install a new battery pack.
If you do not properly charge the phone, battery performance may be compromised.
Display Messages
The following messages show the status of the phone, provides Caller ID information, or
helps you set up and use your phone.
BLOCKED
Indicates the person is calling from a number which is
blocked from
transmission.
DELETE ALL?
Prompt asking if you want to erase all records.
DELETE?
Prompt asking if you want to erase the current record.
ENTER NAME
Prompt telling you to enter a name.
ENTER NUMBER
Prompt telling you to enter a telephone number.
NEW CALLS
Indicates call or calls which have not been reviewed.
HANDSET NAME
Prompt telling you to enter a user name for the handset.
UNAVAILABLE
The handset is not yet registered or is out of range.
NO LINE
Indicates that the telephone line is not connected.
EMPTY
Indicates there are no CID records in memory.