24
save other records.
Ringer On/Off
1. Make sure the phone is in standby mode (not in talk mode).
2. Press the VOL (- or +) button to enter.
3. Use the VOL (- or +) button to scroll to Line 1 or Line 2, press Select soft key to confirm.
4. Use the VOL (- or +) button to scroll to your selection. The default setting is VOL 3.
5. Press the Select soft key to save your selection and the new volume setting shows in the
display.
NOTE: If you choose the ringer OFF, L1/L2 RINGER OFF shows in the display.
Speakerphone, Handset, and Headset Volume
While the phone is in use, during the desired mode, press the VOLUME up or down buttons
until you reach a comfortable listening level. The phone stores the setting after the last
button press.
Hold
In Talk mode, press the HOLD button on handset to hold the line. Line X ON HOLD shows in
the LCD display, and the line icon will flash.
When the line is on hold, the hold alert tone will remind both the person on hold and
the user that the call is still on hold.
Press the corresponding Line soft key (on handset) to release the hold and pick up the call
again.
Conference Calls
3-way conference call with two lines:
1. During a call on Line 1, press the HOLD button to put the call on hold.
2. Press the Line 2 soft key on the handset to get a dial tone. Dial the other number, and
then talk to the other person.
3. The originating caller can then press the Conf soft key shown on the display to establish
a 3-way conference between the two lines.
4. When finished, press the
End
soft key to end the call.
Note: After you enter a 3-way conference, press Line 1 or Line 2 soft key to talk with the
desired line, and the other line will be released automatically.
Page
The page feature helps you locate a misplaced handset.
1. Press the PAGE button on the base. The handset beeps and Page from Base shows in the
handset display.
2. To cancel the page, press the PAGE button on the base, or press any key on the handset.
Otherwise the paging will last for 2 minutes.
