RC-Upgrade Globe Flight Black Snapper CFK, Предварительное руководство по сборке

Страница: 5 / 8

page | 5
www.globe-flight.de
Hints for users of the Black Snapper Brushless Gimbal with AlexMos controller
If you want use your Black Snapper with the Black Snapper Brushless Gimbal GoPro 3, you need
an additional controller, for example the Brushless Gimbal Controller by AlexMos. You can find
the respective sources online, e.g. via Google. This control board requires a power source and, if
you want to control the gimbal manually, additional cables. These cables can be soldered to the
bottom side of the board to save space. Please execute this step only if you have the necessary
soldering skills and if you are absolutely sure about the connections.
There are two ways to control the AlexMos board. Either you traditionally connect the DJI Naza
with your receiver and then chose one of the remaining channels to connect directly to the
AlexMos board (the Naza is „skipped“) or you connect your receiver to the DJI Naza via PPM or
SBus and control the board with the gimbal function of the Naza.
Important: The gain values of the Naza gimbal function must be set to “0”. Otherwise, the
commands of the AlexMos board and the Naza will interfere with each other.