RC Systems ST-72, Инструкция по эксплуатации

Страница: 142 / 142

ST-72 User's Manual
Document: UM-1007 Revision Level A
136
To test access by hostname: Type ping and then the hostname of the unit.
C:\>ping unit-72-1000
Pinging unit-72-1000 [192.168.0.2] with 32 bytes of data:
Reply from 192.168.0.2: bytes=32 time<1ms TTL=128
Reply from 192.168.0.2: bytes=32 time<1ms TTL=128
Reply from 192.168.0.2: bytes=32 time<1ms TTL=128
Reply from 192.168.0.2: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.0.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
If pinging the hostname fails, but pinging the IP address does not, it may indicate a DNS
problem. The command ‘ipconfig /flushdns’ may help if network settings have been
changed recently on the ST-72. Otherwise, the webpage can be accessed by IP address
rather than hostname.
The web links for the ST-72 when using the configuration as shown in section 10.4.1 are
http://192.168.0.2/ or http://unit-72-1000/.