RC Logger 88007RC (Mode 1) Скачать руководство пользователя страница 55

Страница: 55 / 60

Disposal |

20. DISPOSAL

20.1 General

In order to preserve, protect and improve the quality of environment, protect

human health and utilise natural resources prudently and rationally, the user

should return unserviceable product to relevant facilities in accordance with

statutory regulations. The crossed-out wheeled bin indicates the product needs

to be disposed separately and not as municipal waste.

20.2 Batteries

The user is legally obliged

(battery regulation)

to return used batteries and

rechargeable batteries.

Disposing used batteries in the household waste is

prohibited!

Batteries/ rechargeable batteries containing hazardous substances

are marked with the crossed-out wheeled bin. The symbol indicates that the

product is forbidden to be disposed via the domestic refuse. The chemical

symbols for the respective hazardous substances are

= Cadmium,

= Mercury,

= Lead.

You can return used batteries/ rechargeable batteries free of charge to any

collecting point of your local authority, our stores or where batteries/ rechargeable

batteries are sold.

Consequently you comply with your legal obligations and contribute to environmental

protection!

21. FCC COMPLIANCE STATEMENT

FCC ID: OMO-M-19

Statement according to FCC part 15.19

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may

cause undesired operation.

Statement according to FCC part 15.21

Modifications not expressly approved by this company could void the user’s authority to

operate the equipment.

22. PRODUCT SUPPORT

Visit “http://www.rclogger.com/index.php/contact-us” or call +852 2559 2662 for product
support. Additionally visit our support forum at “

http://rclogger.com/forum

”.

Содержание 88007RC (Mode 1)





























































Результаты поиска

Содержание 88007RC (Mode 1)

Отзывы:

Бренды по названию

Популярные бренды

RC Logger 88007RC (Mode 1), Руководство по эксплуатации

Результаты поиска

Содержание 88007RC (Mode 1)

Отзывы:

Бренды по названию

Популярные бренды