manualshive.com logo in svg

RC Logger 88007RC (Mode 1), Руководство по эксплуатации

Поделиться
Скачать
RC Logger 88007RC (Mode 1) Скачать руководство пользователя страница 29

Transmitter  |  

29

3.  Learn throttle (Channel-1)

 

>

Move 

THROTTLE

 up and back down again (full up to full down).

 

>

The LED will blink red 2 times indicating Channel-2 learning.

4.  Learn rudder (Channel-2)

 

>

Move 

RUDDER

 to the left and back to centre again.

 

>

The LED will blink red 3 times indicating Channel-3 learning.

5.  Learn elevator (Channel-3)

 

>

Move 

ELEVATOR

 up and back to centre again.

 

>

The LED will blink red 4 times indicating Channel-4 learning.

6.  Learn aileron (Channel-4)

 

>

Move 

AILERON

 to the left and back to centre again.

 

>

The LED will blink red 5 times indicating Channel-5 learning.

7.  Learn AUX-1 (Channel-5)

 

>

Toggle 

AUX-SWITCH-1

 (3 positions) from position 1 to 2, then 3 and back to 1.

 

>

The LED will blink red 6 times indicating Channel-6 learning.

8.  Learn AUX-2 (Channel-6)

 

>

Toggle

 AUX-SWITCH-2

 (3 positions) from position 1 to 2, then 3 and back to 1.

 

>

The LED will blink red 7 times indicating Channel-7 learning.

9.  Learn AUX-3 (Channel-7)

 

>

Toggle 

AUX-SWITCH-3

 (2 positions) from position 1 to 2 and back to 1.

 

>

The LED will start to blink steadily.

A final longer sound will be emitted indicating learning is 
completed successfully (ready to test/fly).

If no input is detected from Channel-7 (approx. 5 seconds), 
learning will be completed automatically and the final 2 
position switch (AUX-3) is ignored! (Applicable for DX6i)

Notes

Mode

Channel

Position

Function

AUX-1

Channel-5

Position 1: 

BEGINNER MODE

Position 2: 

SPORT MODE

Position 3: 

EXPERT MODE

AUX-2

Channel-6

Position 1: 

ACROBATIC MODE

Position 2: 

NORMAL FLIGHT

Position 3: 

ALTITUDE HEIGHT HOLD MODE

AUX-3

Channel-7

Position 1: 

TRIGGER OFF

Position 2: 

TRIGGER ON 

(optional and can 

be ignored during learning; 5 seconds timeout 

during learning!)

To start test and/or flying in SPORT mode, make sure that 
AUX-1 is in centre position (position 2) and AUX-2 is in 
centre position (position 2).
THROTTLE must be at the lowest position. 

16.3.6  Binding the OneLINK to the »Xtreme

1.  Turn on 

the “OneLINK”.

2. 

Connect a fully charged battery to the »Xtreme. 

The status LED 

(9)

 lights up solid 

green. 

The LED of the “OneLINK” slowly flashes red.

Содержание 88007RC (Mode 1)





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды