Razorweld KUMJRRW160 Скачать руководство пользователя

Страница: 2 / 36

WARRANTY

• 3 Years from date of purchase.

• JASIC Technologies America Inc Ltd warranties all goods as specified by the manufacturer

of those goods.

• This Warranty does not cover freight or goods that have been interfered with.

• All goods in question must be repaired by an authorised repair agent as appointed by this

company.

• Warranty does not cover abuse, mis-use, accident, theft, general wear and tear.

• New product will not be supplied unless JASIC Technologies America Inc has inspected

product returned for warranty and agree to replace product.

• Product will only be replaced if repair is not possible

• Please view full Warranty term and conditions supplied with machine or at www.razorweld.com

or at the back of this manual.

Thank you for your purchase of your RAZORWELD Welding Machine.

We are proud of our range of welding equipment that has a proven track record of innovation, performance

and reliability. Our product range represents the latest developments in Inverter technology put together

by our professional team of highly skilled engineers. The expertise gained from our long involvement with

inverter technology has proven to be invaluable towards the evolution and future development of our equip-

ment range. This experience gives us the inside knowledge on what the arc characteristics, performance

and interface between man and machine should be. Within our team are specialist welders that have a

proven history of welding knowledge and expertise, giving vital input towards ensuring that our machines

deliver control and performance to the utmost professional level. We employ an expert team of profes-

sional sales, marketing and technical personnel that provide us with market trends, market feedback and

customer comments and requirements. Secondly they provide a customer support service that is second

to none, thus ensuring our customers have confidence that they will be well satisfied both now and in the

future.

RAZORWELD welders are manufactured and compliant with - CAN/CSA E60974-1 &

ANSI/IEC 60974-1, guaranteeing you electrical safety and performance.

California Proposition 65

WARNING: This product contains or produces a chemical known to the State of California to cause cancer

and birth defects (or other reproductive harm) (California Health and Safety Code Section 25249.5 et seq.)
WARNING: This product, when used for welding or cutting, produces fumes or gases which contain chemi-

cals known to the State of California to cause birth defects and, in some cases, cancer (California Health

and Safety Code Section 25249.5 et seq.).

INFORMATION SOURCES

• California Health and Safety Code, Section 25249.4 through 25249.13.

• The California Office of Environmental Health Hazard Assessment, 301 Capitol Mall, Sacramento, CA

95814; telephone 916-445-6900.

• California Proposition 65 website: www.oehha.ca.gov/prop65.html.

• American National Standards Institute (ANSI). Product Safety Signs And Labels (ANSI Z535.4), available

from ANSI, 25 West 43rd Street, New York, NY 10036; telephone: 212-642-4900; web site: www.ansi.org.

Razorweld

Razor

weld

™

Содержание KUMJRRW160





































Результаты поиска

Содержание KUMJRRW160

Отзывы:

Похожие инструкции для KUMJRRW160

Бренды по названию

Популярные бренды

Razorweld KUMJRRW160, Руководство по эксплуатации

Результаты поиска

Содержание KUMJRRW160

Отзывы:

Похожие инструкции для KUMJRRW160

Бренды по названию

Популярные бренды