background image

4

ASSEMBLY AND SET-UP

1

 Using two (2) 5 mm Allen 

wrenches, remove the coupling 

bolt on the end of the frame and 

the coupling bolt in the middle of 

the frame. 

4

 Securely tighten the

 (longer)

 

coupling bolt on the rear frame 

using two (2) 5 mm Allen wrenches.

2

 Remove and discard the plastic 

insert. 

Note: 

The coupling bolt in 

the middle of the frame is shorter.

5

 Securely tighten the 

(shorter)

 

coupling bolt in the middle of 

the frame using two (2) 5 mm 

Allen wrenches.

3

 Insert the rear frame into the 

frame assembly.

 Attaching the Frame

Required Tools: 

Two (2) 5 mm Allen wrenches

1

 Using a 5 mm Allen wrench, 

remove the steering bolt from the 

frame assembly.

2

 Insert the front fork into the 

frame assembly. 

 Attaching the Front Fork

Required Tools: 

5 mm Allen wrench

4

 Reinsert the steering bolt 

and secure using a 5 mm 

Allen wrench.

3

 Be sure to properly align the 

slot on headtube with the pin on 

the front fork as shown.

WARNING:

 Failing to 

properly tighten the steering 

bolt that attaches the front fork 

assembly to the frame assembly can 

cause you to lose control and fall.

Содержание PowerRider 360

















Отзывы: