background image

2

SAFETY WARNINGS

PROPER RIDING ATTIRE

Riders should always wear a properly fitted helmet that complies with U.S. 

Consumer Safety Commission (CPSC) Standard 16 CFR 1203. A helmet may  

be legally required by local law or regulation in your area. A long-sleeved 

shirt, long pants, and gloves are recommended. Always wear athletic shoes 

(lace-up shoes with rubber soles) and keep shoelaces tied and out of the way 

of the wheels, motor and drive system. Never ride barefooted or in sandals

USING THE  CHARGER

The charger supplied with the electric PowerRider 360 should be regularly 

examined for damage to the cord, plug, enclosure and other parts. In the event 

of such damage, the PowerRider 360 must not be charged until the charger 

has been repaired or replaced.

Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from PowerRider 360 when not in use.
Always disconnect from the charger prior to wiping down and cleaning your 

PowerRider 360 with damp cloth.

FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS INCREASES RISK OF SERIOUS INJURY.  

USE WITH APPROPRIATE CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.

Содержание PowerRider 360

















Отзывы: