background image

Remove contents from box and check parts against part diagram below. Remove the foam separators that protect the 

components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked 

cables that may have occurred during shipping. Because the Rip Rider 360˚ was partially assembled and packed at the 

factory, there should not be any problems, even if the box has a few scars or dents.

❑ 

Estimated Assembly and Set-Up Time

Razor recommends assembly by an adult with experience in bicycle mechanics. 

Allow up to 15–20 minutes for assembly.

 BEFORE YOU BEGIN

2

       WARNING:

 DO 

NOT USE NON-RAZOR 
PRODUCTS WITH YOUR 
RIPRIDER 360˚.

  

The RipRider 360˚ has been built to 

certain Razor design specifications. 

The original equipment supplied at 

the time of sale was selected on 

the basis of its compatibility with 

the frame, fork and all other parts. 

Certain aftermarket products may 

or may not be compatible.

❑ 

Required Tools

Some tools are supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied tools only as a 

last resort.

Need Help?

 Visit our web site for replacement parts, product support, live chat and a list of  

authorized service centers at 

www.razor.com

 or call toll-free at 866-467-2967 Monday - Friday  

8:00 AM - 5:00 PM Pacific Time.

(2) 5mm  

hexagonal key wrenches

(included)

Bicycle-style tire pump 

for Schrader valve tires, 

with pressure gauge

10mm, 13mm and 15mm 

open end wrenches

(included)

Front Fork Assembly

Front Wheel Assembly

Seat

Rear Castor 

Wheels

Steering Bolt

Front Caliper Brake

Locknut

Allen Socket Screw

Washer

Allen Long Screw

Combinatory Nut

Washer

Allen Socket Screw

Left Pedal

Right 

Pedal

Frame 

Assembly

Содержание 20036501




















Отзывы: