01.12.2017
- 6 -
raze-cat
Attaching the grinding belt
Unplug the ES 2000 from the mains. In order to attach it to the device, the
grinding belt is placed over the drive roller (2) (make sure that the arrows,
which mark the directionality on the inside of the grinding belt, are pointing in
the direction of movement!)
Press the idler (3) against the spring’s pressure back into its recess until the
grinding belt (7) can be placed over the idler (3).
Ensure that the belt covers both rollers completely. Move the grinding belt by
hand for two to three revolutions until it runs smoothly over both rollers (1 and
3), only now should the motor be started.
3
Belt holder
2
7
