01.12.2017
- 3 -
raze-cat
Safety instructions
Please read these operating instructions carefully before you start using the
device. Familiarize yourself with the handling of the ES 2000. Pay attention
to the operating restrictions. Observe the following basic safety precautions
to avoid electrocution, injury and fire hazard:
•
Do not immerse the ES 2000 in water, or subject it to rain or snow.
•
Do not use the device in a humid or wet environment. To increase your
safety a GFCI (ground fault circuit interrupter) should be put in place.
•
Ensure the device is switched off before you plug the power cord into
the mains outlet.
•
Use only approved and marked extension cords.
•
Do not carry the plugged in device, while your finger rests on the
switch.
•
Do not use the device in the proximity of flammable liquids or
combustibles (flying sparks).
•
Protect yourself from electrocution and avoid physical contact with
earthed parts (pipes, radiators, cookers, et cetera).
•
Do not overload the device. Work only within the specified
performance range.
•
Do not carry the device by its cable. Pull the cord at the plug from the
mains outlet. Protect the cable from oil, heat, water and sharp edges.
•
Have an expert repair all potential damage to the cable.
•
Unplug the device from the mains while it is idling or during
maintenance and resetting.
•
Keep the device out of the reach of children.
•
Keep your workspace tidy and well lit.
•
Keep others, especially children, away from your workspace and do
not let others touch the unit or the cable.
•
Wear safety goggles. There is danger of flying sparks.
•
Use ear protectors.
•
Do not reach into the unit while it is switched on.
