RAZBAM Metroliner III SA227-BC, Руководство по эксплуатации самолета

Страница: 58 / 93

RAZAIR ‐ A1 ‐ METRO ‐ III ‐ AFM ‐ 001
2 ‐ 6
4. Radial to selected ADF station display.
OPERATION
The units are OFF by default, to turn them ON click on the OUTER Power/Volume knob. The display will appear and the
unit will be ready for operation.
To change a frequency click on the outer knob to change whole number values in the 100 to 1799 range. Clicking on the
inner knob will change values in the 0.0 to 0.9 range.
DME RECEIVER
The aircraft has one DME receiver display. It is tied to the NAV receivers and can display DME information when
available.
1. Power Switch
2. Display Mode Switch.
3. Channel Switch
4. Secondary Information Display
5. Secondary Information Label.
6. Distance in nautical miles to selected DME Station.
OPERATION
The unit is OFF by default, to turn it ON click on the Power Switch. The display will appear and the unit will be ready for
operation. The unit will always display the distance in nautical miles to the selected DME station.
Click on the CHNL switch to change between DME1 and DME2.
Click on the MODE switch to change the DME secondary information display:
1. IDENT Code (Default)
2. Closure speed in knots.
3. Time to reach the selected station in minutes.
AUDIO CONTROL PANEL
The aircraft has two audio control panels, one for the Pilot’s and the other one for the Copilot, from which audio output
and transmitter selection can be made.
NOTE
If no DME data is being received in the selected channel the
display will show dashes.
Fig. 79 DME Receiver display