RQD014ENr05 Rev. Date: 2022-10-25
12
2.5 Adjustable Footrest Installation
1. Remove wrapped footrests from the inner accessory box.
2. Place the footrest hanger tubes into the receivers, welded at
the front of the chair frame
. If the support tubes are directed
forward, the pins on the tubes will engage with grooves in the
receivers and lock in place.
2.6 Fastener Installation
All fasteners should be installed securely. Locknuts that are
removed for any reason may need to be replaced rather than re-
used. Check performance of nyloc nuts when re-attaching to
screw. There should be significant detectable resistance when
tightening. If not, replace the nyloc nut with a new one. It is
advisable to check annually that all fasteners are secure.
