13
Armrest Angle Adjustment - All Models
.
The armrest angle can be adjusted up 5° or down 5°
if the backrest angle is adjusted from the 90° factory
position.
Tools needed: ½” wrench, 3/16” hex key
1. Loosen and remove lower bolt, washer, and
lock nut.
2. Keeping the upper bolt in place, rotate the
armrest assembly until the preferred position
is reached by aligning one of the 3 holes
(arranged in a triangle) on the armrest pivot
plate with the armrest support weld mount.
3. Replace the 3/8” x ¾” bolt and 3/8” washer
into the previous position on the armrest pivot
plate, finish with the lock nut.
4. Tighten bolt and lock nut.
5. Repeat steps 1 to 4 for other armrest.
