background image

   

 

 

 

2

SAFETY PRECAUTIONS 

 

Failure to comply may cause injury or damage! 

 

It is important that the Raz Rehab Shower Chair be properly assembled and 
all adjustments be made carefully. For clarification of any section of this 
manual, contact the Canadian distributor or manufacturer. 

 

Dynamic Health Care Solutions  

 

Raz Design Inc. 

Bolton, Ontario   Canada 

 

 

Toronto, Ontario   Canada 

905.951.8541  /  866.875.2877 

 

416.751.0400   

 

                        

[email protected]

 

 

 

[email protected]

  

 
 

CHAIR CLASSIFICATION BASED ON MAXIMUM USER WEIGHT 

AP / SP / AT 

300 lbs (136 kg) 

 
 

SAFETY INSTRUCTIONS TO CONSIDER FOR RETAIL PURPOSES 

 
 
 

Forward Stability  

The front 5” casters on all models are equipped with dual locks. The step-on lever activates 
both the roll lock and the swivel lock.  

It is essential that the front casters be in the forward 

and outward position before engaging the locks for optimum forward and lateral 
stability. 

 

USERS MAY NOT

 

lean forward as this may cause the chair to tip forward.  

USERS MAY NOT

 

wheel down a ramp (SP, SPHD models) without an attendant who can hold 

onto the chair during the descent. 

 
WHEEL LOCKS ARE NOT BRAKES! Never allow use of the wheel locks to slow down 
the commode when descending inclines as this could cause the chair to tip in the 
direction of travel. 
 

Lateral Stability 

USERS MAY NOT

 

lean over the edge of a Raz Shower Chair as this could cause the chair to tip.

  

USERS MAY NOT

 

attempt to pick up objects from the floor by leaning over and reaching – a 

reacher or assistance from others should be employed

.  

USERS MAY NOT

 

position the Shower Chair on a side slope as this could cause it to tip. 

 
 
 
 

 

Содержание AP














Отзывы: